Choosing a Food Metal Detector: Aperture, Frequency and Reject Method

2026.11.18

Short answer

Four parameters decide whether a food metal detector works: aperture size, operating frequency, reject method and ingress protection. Aperture is the one most often got wrong — enlarging it to pass a bigger box costs you a whole step of sensitivity.

Aperture: the first determinant of sensitivity

The larger the aperture, the weaker the field in the centre and the larger the smallest detectable sphere. That is physics, not tuning.

ApertureTypical ferrous sphereProduct
200 × 80 mmabout 0.8 mmSmall powder sachets, tablets, snack packs
300 × 150 mmabout 1.0 mmStandard bagged food, biscuits
400 × 200 mmabout 1.2 mmBoxed food, frozen products
600 × 300 mm1.5 mm and aboveFull cases, bulk packs

The rule: the smallest aperture that passes the product. Choosing a large aperture for the occasional big box degrades every other check.

Frequency: match the product, not the brochure

  • Low (around 50–100 kHz): sensitive to ferrous, good penetration, suits wet or salty products
  • Medium (around 200–400 kHz): balances ferrous and non-ferrous, the general-purpose choice
  • High (800 kHz and above): sensitive to stainless and fine wire, but more affected by product effect

Product effect is the biggest nuisance: moisture, salt and temperature change all trigger false rejects. A multi-frequency unit lets you test each frequency and pick the quietest for that product.

Reject method: three options, choose carefully

MethodBest forCaution
Air blast / pusherSmall items, light packs, high speedScatters product; unsuitable for powder
Flap / drop-outBags, cases, medium speedNeeds drop space below the belt
Belt stop and alarmLarge or high-value items, low speedManual removal, slower but most reliable

Whatever the method, verify that the rejector actually moves — "it alarmed but nothing was rejected" is the most common audit failure.

Protection and environment

Food plants often wash down with high-pressure water: specify IP66 or better. Dusty areas may need explosion-protection ratings. Belt material must be food-contact compliant and quickly removable for cleaning.

Three tests before acceptance

  1. Three test pieces: ferrous, non-ferrous and stainless, recording the smallest detectable size for each
  2. Nine-point test: centre, four edges and four corners of the aperture — check for sensitivity loss at the edges
  3. Test with product, not empty: empty-belt numbers are meaningless; product effect reduces sensitivity in real use

FAQ

Can a metal detector find glass? No. Glass, stone and bone require X-ray inspection.

Why does it miss things with product on the belt but pass empty? Product effect. Moisture, salt and metallic packaging interfere; change frequency or move to X-ray.

Can it work through foil packaging? No. Metallised film blocks the signal entirely; those products need X-ray.

Is higher sensitivity always better? No. It produces false rejects, the line disables the rejector, and you end up with no inspection at all.

Related

Food X-ray vs metal detector · X-ray inspection as a HACCP CCP

Products: food metal detector · food X-ray inspection system

Want advice for your own site? Tell us what you inspect, the daily volume and the site conditions — we will propose an approach before proposing a product.